
Deck builders in Kellyville
New decks and rebuilds for Kellyville homes, from a licensed carpenter. We measure on site and you get a written quote before anything starts.
- New decks, rebuilds and re-boarding
- Merbau, treated pine and composite, including Trex
- Haz measures, quotes and builds with his crew
- NSW contractor licence276621CCarpenter, held since 2014Check the register
- QuotesFree, on siteMonday to Saturday, from 7am
- Preferred installer for
What we build
Decks we build in Kellyville
From a small courtyard deck to a raised deck on a sloping block, with the stairs, balustrade and screen that finish it.
We build in merbau and other hardwoods, treated pine and composite, including Trex, and help you choose what suits the block, the sun and the budget.
Decks by material

The deck jobs we take on
- 01
New decks
Ground-level and raised decks built from the footings up, with steps, landings and balustrades where the height calls for them.
- 02
Rebuilds and re-boarding
If the bearers and joists are sound, new boards can go over them. If they are not, we replace the frame and show you why.
- 03
Decks on sloping blocks
Raised and two-level decks that follow the fall of the land, on footings set for the slope.
- 04
Pool and spa decks
Decks around pools and in-ground spas, planned around the pool fence, the water and access to the equipment.
- 05
Side-passage and courtyard decks
Narrow or awkward spaces boarded so they can be used every day.
Typical prices
Typical deck prices in Sydney
Our typical prices per square metre for a deck up to a metre off the ground, with its footings and frame. Supplied and installed, including GST. Checked October 2026. Your written quote after the measure gives the price for your job.
- Treated pine
- $205–$400per m²
- Merbau
- $345–$630per m²
- Spotted gum
- $400–$690per m²
- Composite, including Trex
- $320–$805per m²
Our work
Decks we’ve built
Real jobs. Open one to see every photo.
What customers say on Google
Google rating
5.0
From 33 reviews on Google
“The boys nailed it! Built my deck out of engineered timber and the quality of work was fantastic. Job was done quick, site was left clean, etc. Would recommend!”
Plan it first
Plan your deck
- Deck designer
Design your deck
Choose the type of deck, the boards and a colour, and send your choices with your enquiry. - Approval check
Does it need approval?
Answer a few questions to see whether your deck is likely to need council approval. - Cost guide
What a deck costs
What drives the price of a deck in Sydney, from the boards to the height off the ground.
From first message to finished job
How a deck job runs
Four steps, and you know the price before anything starts.
Step 01
Send us the details
Use the form or call. A few lines and a photo or two of the area are enough to start.
Step 02
We call you back
Usually within one working day. We talk through what you want and arrange a time to look at the site.
Step 03
We measure on site
Usually within a week of the call. We check the block, the access and the drainage, and suggest the materials and layout that suit.
Step 04
Haz quotes, then we build
Your written quote follows within a few working days. Once you are happy with it, Haz and his crew build it and leave the site tidy.
Your block
Building a deck in Kellyville
We check these at the measure and allow for them in your written quote. Map layers checked October 2026.
Check your address on the NSW Planning Portal mapSloping blocks
Much of Kellyville sits on a slope. If your yard falls away, allow for a deck that needs deeper footings, bracing and often a balustrade; we measure the fall at the quote.
Bush fire areas
Parts of Kellyville are bush fire prone. Check whether your block is mapped before you choose materials: there the bush fire attack level (BAL) decides which boards and framing a deck can use.
Do I need council approval for a deck in NSW?
Not always. Many low decks are exempt development under the State policy, as long as they stay within its limits on floor area, height above ground and distance from the boundaries. A deck that is higher or larger, or on a heritage-listed or bush fire prone lot, usually needs a development application or a complying development certificate. We check this for your deck before you commit.
Can you re-board my deck instead of rebuilding it?
Often, yes. If the bearers, joists and footings are sound and the frame is level, new boards can go straight on. We test the frame when we measure. If some parts are rotten we replace just those where we can, and tell you plainly if the whole frame needs to go.
Should I choose timber or composite?
It comes down to look, feel and upkeep. Timber feels natural underfoot and can be sanded back, but it needs oiling to hold its colour. Composite keeps its colour with a wash and no oil, but darker boards get hot in full sun. We bring boards to look at on site and talk it through with you.
Can you build on a steep or bushy block?
Yes. Several of our decks are on sloping bush blocks. A steep site may need deeper footings, two levels or stairs. If the land is mapped as bush fire prone, the approval path and construction rules change, so we check the map early.
Decks near Kellyville
- Beaumont Hills
- North Kellyville
- Bella Vista
- Glenwood
- Kellyville Ridge
- Glenhaven
- Castle Hill
- Baulkham Hills
- Rouse Hill
- Winston Hills

Planning a deck in Kellyville? Tell us about it
A few details and a photo or two of the area are enough to start. We'll be in touch to talk it through.
- Google reviews
- 5.0 from 33
- NSW licence
- 276621C · Carpenter
- Quotes
- Free, on site
- Licensed
- Since 2014









